Japanese

 

Electronics and Manufacturing

We are contributing to enhancing industrial competitiveness by developing advanced electronic and optical device technologies that enable both performance enhancement and significant energy savings of IT equipment, and innovative manufacturing technologies that enable energy savings, resource savings, and low cost. Moreover, we are building a highly efficient production system by combining innovative manufacturing technologies and sensing technologies based on the advanced devices.

Type A (Tenure-track position)/Type B (Tenured position)

  • AIST seeks research scientists with outstanding abilities and/or potential for conducting innovative R&D activities in wide range of fields of science and technology. Research scientists will be employed for tenure-track (Type A), or tenured positions (Type B).
  • Recruitment and Employment Committeee of AIST will determine which positions are suitable for an successful applicant.
  • Tenure of an employed research scientist for Type A is 5 years, however, tenure can be reduced to 3 yeras based on decision by the committee.
  • A tenure-track research scientist can be promoted to a research scientist for a tenured position by qualifying "tenure review". The tenure review will be carried out about 18 months before tenure expires. The scope of the tenure review is to quantify contributions to AIST missions, and performance in term. In the last 5 years, more than 90% of tenure-track research scientists have been qualified.

Following is the list of job opportunities which are now open for recruitment. Deadline is May 11, 2018.【CLOSE】

Entry ID
DEV-1
 Title Research and development for power-efficient and multi-functional devices and circuits for data acquisition, processing and storage
Details of Job Opportunity
 Spintronics Research Center and Nanoelectronics Research Institute invite highly motivated candidates to apply for research positions regarding power-efficiency improvement and 3D integration of logic and memory circuits which are necessary to lift the energy limitation in utilizing big data. Specific research subjects include LSI manufacturing by 3D integration, power reduction and circuit integration of non-volatile memories such as MRAM, low-power logic circuits incorporating new materials and structures, high-variety low-volume manufacturing of IoT devices, among others. Successful candidates are expected to work on these subjects in close collaboration with the industry and academia..
Start of Employment April 1st, 2019
Research Unit Nanoelectronics Research Institute Spintronics Research Center
URL https://unit.aist.go.jp/neri/en/index.html http://www.aist.go.jp/aist_e/dept/en_delma.html
Inquiry E-mail：rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel：+81-29-862-6592
Number of Position 4
Entry ID
DEV-2
 Title Research and development on advanced dynamic optical networking
Details of Job Opportunity
 This position seeks for applicants who have comprehensive skills and/or strong interest in both software-defined optical transport and enabling photonic devices, and enthusiasm for the dissemination of dynamic optical networking for Society 5.0 era..
Start of Employment April 1st, 2019
Research Unit Electronics and Photonics Research Institute
URL https://unit.aist.go.jp/esprit/
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-861-5511
Number of Position 1
Entry ID
DEV-3
 Title Research and development on Photoinduced Process and Optical Sensing
Details of Job Opportunity
 We are researching and developing optical technologies with biosensing technologies that detect viruses in the environment, identify infectivity of viruses, analyze physiological phenomena and disease diagnosis with high sensitivity, short time and low cost, or laser processing as smart process. We widely recruit researchers with knowledge and passion in research and development of biosensing, optical technologies, process technologies..
Start of Employment April 1st, 2019
Research Unit Electronics and Photonics Research Institute
URL https://unit.aist.go.jp/esprit/
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-861-5511
Number of Position 2
Entry ID
DEV-4
 Title Research and Development of Flexible & Printed Electronics.
Details of Job Opportunity
 Applications are invited for research scientists in the field of flexible printed electronics for sensor, display, actuator, flexible circuits and large scale devices. Especially, those who have experience of device engineering, applied physics, chemistry, material science, solution-based process, film engineering and soft materials are very much welcome..
Start of Employment April 1st, 2019
Research Unit Flexible Electronics Research Center
URL http://unit.aist.go.jp/flec/index_en.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-862-6592
Number of Position 1
Entry ID
DEV-5
 Title Researches and developments of electronic and photonic materials, and their devices technologies
Details of Job Opportunity
 We aim to break through the limit of conventional electronic devices, optical devices and sensors, and provide novel functions. To realize superior devices for information recording, computing, communication, sensing, etc., we are developing emerging materials such as superconductors, functional oxides, compound semiconductors, and organic, and their device technology. For this reason, we will widely recruit highly motivated researchers with basic knowledge, expertise and research achievements related to applied physics, materials science, chemistry, electrical and electronic engineering..
Start of Employment April 1st, 2019
Research Unit Electronics and Photonics Research Institute
URL https://unit.aist.go.jp/esprit/
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-861-5511
Number of Position 3
Entry ID
MANU-1
 Title Development of Advanced Manufacturing Processing Technology
Details of Job Opportunity
 We are seeking a highly motivated research scientist with basic knowledge in the fields of manufacturing process, materials science, surface sciences and information sciences, and being positive for interdisciplinary study, in order to develop advanced manufacturing processing technology which utilize characteristics of materials properties such as additive manufacturing, material processing and combined processing with it and conventional processing,..
Start of Employment April 1st, 2019
Research Unit Advanced Manufacturing Research Institute
URL https://unit.aist.go.jp/am-ri/index_en.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-861-5511
Number of Position 3
Entry ID
MANU-2
 Title Research and development of the Integrated MEMS Sensing Devices
Details of Job Opportunity
 This position will be engaged in research and development of integrated MEMS devices that will be utilized in the future IoT/CPS society （e.g. human and/or environmental monitoring sensors). We are seeking research scientists who have expertise in any one of mechanical engineering, electrical and electronic engineering, communications engineering, material engineering, micro fabrication technology, instrumental technology, physical engineering, applied physics, chemistry, and biology, and have willingness to develop those interdisciplinary fields..
Start of Employment April 1st, 2019
Research Unit Research center for Ubiquitous MEMS and Micro Engineering
URL https://unit.aist.go.jp/umemsme/ci/index.html
Inquiry E-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel: +81-29-861-5511
Number of Position 1
Entry ID
MANU-3
 Title Research on the advancement of advanced coating technology
Details of Job Opportunity
 Research and development on advanced ceramics coating technology and device development indispensable for high performance of energy environment related members, electronic components, device technologies , medical-related devices will be conducted. Therefore, we will widely recruit researchers who has high expertise in the basic research on materials science, surface science, or in the manufacturing engineering related to powder engineering,, heat resistant materials, low temperature process or in the device design / production, and who is willing to ambitiously cooperate with other fields..
Start of Employment April 1st, 2019
Research Unit Advanced Coating Research Center
URL https://unit.aist.go.jp/atc/en/index.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-861-5511
Number of Position 1
Entry ID
SDEV-1
 Title Development of ultrahigh-performance computers for the post-Moore generations by multi-disciplinary approach
Details of Job Opportunity
 A research position is available for highly qualified candidates to carry out R&D on the information-processing hardware that outperforms conventional von-Neumann-type computers in evolving applications such as sophisticated machine learning and inference, large-scale combinatorial optimization, quantum simulation, secure cryptography, and so on. This position requires ability to integrate multiple disciplines such as information theory, computer science, software, module/circuit design, and electronic devices/materials, and quantum information processing. A successful candidate must have not only high expertise in at least one of these disciplines but also high motivation to learn new knowledge and skills of various disciplines for cross-sectoral technology integration..
Start of Employment April 1st, 2019
Research Unit Nanoelectronics Research Institute
URL https://unit.aist.go.jp/neri/en/index.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-862-6592
Number of Position 1
Entry ID
SMANU-1
 Title Research and development of material/process technologies related to surface functionalization for smart manufacturing
Details of Job Opportunity
 We focus on the surface functionalization, which provides the high value and which improves the degree of customer satisfaction. Research and development of surface microstructure forming process, coating technology, simulation technology, and surface measurement technology would be integrally promoted for the establishment of the functionalization technology of surfaces in accordance with the purpose of use. For this reason, we are seeking a highly motivated research scientist who have high expertise in materials or processing technology, surface science, mechanical engineering and also have basic knowledge on these fields in general, and can work ambitiously in collaboration with other fields..
Start of Employment April 1st, 2019
Research Unit Advanced Manufacturing Research Institute
URL https://unit.aist.go.jp/am-ri/index_en.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:+81-29-862-6592
Number of Position 1
Entry ID
SMANU-3
 Title Research and development of implementing the Minimal-fab in society and applying the knowledge from sensors to the Minimal-fab production.
Details of Job Opportunity
 We are recruiting researchers who have expertise in integration of device production and information derived from its manufacturing machines, products, factory environment and operators. This position will work on enhancing the prospect for competitiveness of the manufacturing industry of Japan through the introduction of IoT/CPS into on-demand production such as Minimal-fab and additive manufacturing..
Start of Employment April 1st, 2019
Research Unit Advanced Manufacturing Research Institute
URL https://unit.aist.go.jp/am-ri/index_en.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel +81-29-862-6592
Number of Position 1

Type D (Non tenure-track position based on performance-based pay)

  • AIST seeks research scientists with professional expertise and worldwide reputation for conducting highly prioritized R&D projects by AIST.
  • Annual Salary System, which is a category of results-oriented salary system, are applied to successful applicants. Applicants should have a Ph. D. degree, or equivalent experiences on the R&D subjects.
  • These positions are not tenure-track, and a tenure review is not scheduled for these categories of research scientists.
  • Tenure is up to 5 years, and reappointment is possible for one further term.

Following is the list of job opportunities which are now open for recruitment. Deadline is May 11, 2018.【CLOSE】

Entry ID
PDEV-1
 Title Development of design and process technologies for device manufacturing by Minimal Fab
Details of Job Opportunity
 Nanoelectronics Research Institute is seeking highly qualified candidates for a research position regarding device design and process development for the Minimal Fab system which realizes the new manufacturing concept for high-variety low-volume production. The mission of this position include management of the Minimal Fab facility and systematic accumulation of the developed design and process information. Experiences of developing electronic devices, circuits, and/or MEMS are desirable..
Start of Employment April 1st, 2019
Research Unit Nanoelectronics Research Institute, Minimal System Group
URL https://unit.aist.go.jp/neri/en/index.html
Inquiry E-mail：　rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel：　+81-29-862-6592
Number of Position 1
Entry ID
PMANU-1
 Title Advancement of surface functionalization technologies and these expansion to the industry
Details of Job Opportunity
 We are seeking a highly motivated research scientist who has a high expertise in materials or processing technology, surface science, mechanical engineering and also actively engages in the expansion of these surface functionalization technologies to the industry..
Start of Employment April 1st, 2019
Research Unit Advanced Manufacturing Research Institute,　Surface Interaction Design Research Group
URL https://unit.aist.go.jp/am-ri/ja/teams/index.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:　+81-29-862-6592
Number of Position 1
Entry ID
PMANU-2
 Title Technology transfer of Advanced ceramic coating
Details of Job Opportunity
 We will conduct research and development on our center original advanced ceramics coating technology　such as aerosol deposition (AD) , photo assisted metalorganic deposition (PA-MOD) and etc. indispensable for high functionalization of energy environment related members, electronic components, device products, medical devices and bridges to industry. Therefore, we widely recruit researchers or engineers with advanced skills and extensive backgrounds, such as mass production technology development, marketing experience, technology management in private companies, regarding process technology and material technology related to coating. We also expect the ability to have useful skills with regard to AI technology that contributes to these technology transfers..
Start of Employment April 1st, 2019
Research Unit Advanced Coating Research Center
URL https://unit.aist.go.jp/atc/en/index.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:　+81-29-862-6592
Number of Position 1
Entry ID
SDEV-2
 Title Research and development on optical signal processing technologies using nonlinear optical effects
Details of Job Opportunity
 This position seeks for applicants who have comprehensive skills and/or strong interest in optical signal processing technologies for broadband signals based on nonlinear optical effects occurring in nonlinear media such as optical fibers..
Start of Employment April 1, 2019
Research Unit Electronics and Photonics Research Institute
URL https://unit.aist.go.jp/esprit/
Inquiry E-mail：　rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel: +81-29-861-5511
Number of Position 2
Entry ID
SDEV-3
 Title Research and development for high-performance spin torque oscillator devices and their practical application
Details of Job Opportunity
 Spintronics Research Center invites highly motivated candidates to apply for research positions regarding spintronics. Specific research subjects include design and characterization of microwave oscillators based on ferromagnetic resonance and their circuits. This position requires experimental skills on ferromagnetic resonance and high-frequency measurements, knowledge and experience on analog circuits, and willingness to work on industrial applications of these devices..
Start of Employment April 1, 2019
Research Unit Spintronics Research Center, Metal Spintronics Team
URL http://www.aist.go.jp/aist_e/dept/en_delma.html
Inquiry E-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel: +81-29-862-6592
Number of Position 1
Entry ID
SMANU-2
 Title Research and Development of Hybrid Device and Manufacturing Technology
Details of Job Opportunity
 Research position is available in the field of hybrid electronics and manufacturing. In particular, those who have interest in the AI sensor, IoT device, vacuum/solution hybrid process, soft and hard hybrid device, mounting technology, MEMS related technology, chemical engineering and related device/manufacturing technology, material development are very much welcome..
Start of Employment April 1, 2019
Research Unit Flexible Electronics Research Center
URL http://unit.aist.go.jp/flec/index_en.html
Inquiry e-mail: rp-eleman-ml*aist.go.jp
(Replace "*" to "@" for sending email)
Tel:　+81-29-862-6592
Number of Position 1
  • Support for International visitors

▲ ページトップへ

Copyright © National Institute of Advanced Industrial Science and Technology （AIST）
（Japan Corporate Number 7010005005425）. All rights reserved.