Vol.5 No.2 2012

36/66

Research paper : Toward the integrated optimization of steel plate production process (K. Nishioka et al.)−110−Synthesiology - English edition Vol.5 No.2 (2012) Changed The World, Donna Sammons Carpenter, NewYork (1990).[6]A.Seike: Nihongata Soshikikan Kankei No Manejimento (Management of interorganizational relation of Japanese type), Hakuto-Shobo Publishing Company, Tokyo (1995) (in Japanese).[7]K. Shimokawa: Fodo · Shisutemu Kara Jasuto · in · Taimu Seisan Shisutemu’e (From the Ford System to the Just-In-Time production system), Kigyo Keiei No Rekishiteki Kenkyu, (Historical Study of Corporate Management), Iwanami Shoten, Tokyo, 284-303 (1990) (in Japanese).[8]Y. Kadota: Shin Toyota Shisutemu (New Toyota System), Kodansha, Tokyo (1991) (in Japanese).[9]Y. Sakazume: Seru Seisanhoshiki To Bungyo No Shintenkai, Donyukigyou 8sha No Jireikenkyu (New development of the cellular manufacturing system and division of labor, Case study of 8 companies that introduced the system), Japan Academy of Business Administration Report, 16, 95-110 (2006) (in Japanese).[10]Nippon Steel: “Shin Nittetsu” (“Nippon Steel”: House magazine of Nippon Steel), 81, 2-5 (1994) (in Japanese).[11]Nippon Steel: “Shin Nittetsu” (“Nippon Steel”: House magazine of Nippon Steel), 117, 6-9 (1997) (in Japanese).[12]T. Fujimoto: Seisan Manejimento Nyumon І: Seisan Shisutemu Hen (Introduction to production management І: Production system), Nihon Keizai Shimbun, Inc., Tokyo (2001) (in Japanese).[13]D.Natsume: Tekkogyo Ni Okeru Seisankanri No Tenkai (Deployment of production control in the steel industry), Dobunkan Shuppan, Tokyo (2005) (in Japanese).[14]S.J. Balderstone and V.J. Mabin: A review of goldratt’s theory of constraints (TOC) - lessons from the international literature, Operations Research Society of New Zealand 33rd Annual Conference, University of Auckland, New Zealand (1998).[15]J. Ashayeri, R.J.M. Heuts, H.G.L. Lansdaal and L.W.G. Strijbosch: Cyclic production-inventory planning and control in the pre-Deco industry: A case study, International Journal of Production Economics, 103 (2), 715-725 (2006).[16]M. Gupta and A. Kohli: Enterprise resource planning systems and its implications for operations function, Technovation, 26 (5-6), 687-696 (2006).[17]K.J. Watson, J.H. Blackstone and S.C. Gardiner: The evolution of a management philosophy: The theory of constraints, Journal of Operations Management, 25 (2), 387-402 (2007).[18]Z. Li and M. Ierapetritou: Process scheduling under uncertainty: Review and challenges, Computers and Chemical Engineering, 32 (4-5), 715-727 (2008).[19]C.T. Maravelias and C. Sung: Integration of production planning and scheduling: Overview, challenges and opportunities, Computers and Chemical Engineering, 33 (12), 1919-1930 (2009).[20]J.M. Framinan and R. Ruiz: Architecture of manufacturing scheduling systems: Literature review and an integrated proposal, European Journal of Operational Research, 205 (2), 237-246 (2010).[21]Y.-W. Chen, Y.-Z. Lu, M. Ge, G.-K. Yang and C.-C. Pan: Development of hybrid evolutionary algorithms for production scheduling of hot strip mill, Computers and Operations Research, 39 (2), 339-349 (2012).[22]T. Altiok: Performance analysis of manufacturing systems, Springer Series in Operations Research, ed. P. Glynn, Springer (1996).[23]G.B. Olson: Transformation plasticity and toughening, AuthorsKiyoshi NishiokaIn 1977, graduated from the Graduate School of Engineering, Osaka University, majoring in Precision Engineering. In 1977, entered Nippon Steel Corporation. Worked there on the manufacturing of steel plates, research, head office technical administration, and planning and development of company-wide technical development as a member of the board. In 1997, assumed the role of superintendent of Kimitsu Plate Mill (General Manager); in 2001, General Manager of Plate Sales Division in Head Office; in 2005, board member; in 2006, Director; in 2009, Executive Advisor; Visiting Research Fellow of the Research Center for Advanced Science and Technology, Tokyo University. In 2005, received the Technical Contribution Award from the Iron and Steel Institute of Japan; in 2007, received the KOMO Thermal Technology Award for Technical Promotion from the Tanikawa Fund Promotion of Thermal Technology. In relation to the present paper, he started innovative undertakings in plate production control as the Plate Mill superintendent and worked as leader for the realization of integrated optimization.Yasushi MizutaniIn 1991, graduated from the Graduate School of Engineering, Tokyo University, majoring in Precision Engineering. In 2006, graduated from the doctorate course of Northwestern University, Ph.D. (Materials Science and Engineering). In 1991, entered Nippon Steel Corporation. Worked as chief researcher in Kimitsu Technical Research Division of the Technical Development Bureau, leader of the technical group of steel plates in Journal de Phys. , Colloque C1, 407-418 (1996).[24]K. Ueda: Sohatsu To Maruchiejento Shisutemu (Emergence and multi-agent system), Baifukan, Tokyo (2007) (in Japanese).[25]I. Nonaka and H. Takeuchi: Chishiki Sozo Kigyo (Knowledge creator companies), Toyo Keizai, Tokyo (1996) (in Japanese).[26]D.J. Teece: Dynamic Capabilities and Strategic Management, Oxford University Press, Oxford (2009).[27]C.E. Helfat, S. Finkelstein, W. Mitchell, M. Peteraf, H. Singh, D. Teece and S.G. Winter: Dynamic capabilities, Understanding Strategic Change in Organization, Blackwell Publishing (2007).[28]P. Bourdieu: Kagaku No Kagaku: Koreju · Do · Furansu Saishukogi (Science of science: Last lecture in College de France), Fujiwara Shoten, Tokyo (2010) (in Japanese).[29]G. V. Krogh, K.Ichijo and I. Nonaka: Narejji · Ineburingu (Knowledge enabling), Toyo Keizi, Tokyo (2001) (in Japanese).[30]T. Fujimoto: Nihon No Monozukuri Tetsugaku (Philosophy of monozukuri in Japan), Nihon Keizai Shimbun, Inc., Tokyo (2004) (in Japanese).[31]K. Henmi and M. Muto: Jenerikku Iyakuhin Koza (Lecture on generic drugs), Gyosei, Tokyo (2011) (in Japanese).[32]H. Yoshikawa: Tekuno Gurobarizumu (Techno-globalism), Journal of the Japan Society of Mechanical Engineers, 94 (868), 200-204 (1991) (in Japanese).

※このページを正しく表示するにはFlashPlayer9以上が必要です