General Research Areas

〇Application deadline
　All the application documents must reach our office no later than following date.

April 12, 2013 (Applicants for multiple positions)
April 26, 2013 (Applicants for one position)

〇Recruitment information

Search for the information by General Research Areas. ＊Please take a look at several research areas, as some recruitment information in other research areas may be related to the job opportunity of your interest.
1	Biology	2	Agriculture
3	Pharmacy	4	Medical Science
5	Human Medical Engineering	6	Electrical Engineering and Electronics
7	Information	8	Mathematics
9	Social Science	10	Mechanical Engineering
11	Materials Science	12	Process Engineering
13	Marine Engineering and Aerospace Engineering	14	Earth and Planetary Science
15	Civil, Architectural and Resource Engineering	16	Physics
17	Applied Physics and Engineering Sciences	18	Chemistry
19	Astronomy	20	Etc.

1. Biology

Mol-1	Development of fundamental technologies for drug discovery and medical treatment through the analyses of biological macromolecules and mechanisms	Life Science and Biotechnology
Mol-2	Research and development in measurement, analysis, and regulation of biological molecules	Life Science and Biotechnology
Mol-3	Basic and applied research for drug profiling and lead optimization	Life Science and Biotechnology
Bio-1	R&D-based Biological process	Life Science and Biotechnology
Hum-2	Research and development in human, health/welfare and medical engineering for the promotion of healthy and active lives	Life Science and Biotechnology
MSRC-1	Development of measurement technology for on-site sensing for agricultural production	Metrology and Measurement Science
MIJ-7	Research and development of matrix type reference materials contributing to environmental and food safety	Metrology and Measurement Science

2. Agriculture

Mol-2	Research and development in measurement, analysis, and regulation of biological molecules	Life Science and Biotechnology
Bio-1	R&D-based Biological process	Life Science and Biotechnology
MSRC-1	Development of measurement technology for on-site sensing for agricultural production	Metrology and Measurement Science
MIJ-7	Research and development of matrix type reference materials contributing to environmental and food safety	Metrology and Measurement Science

3. Pharmacy

Mol-1	Development of fundamental technologies for drug discovery and medical treatment through the analyses of biological macromolecules and mechanisms	Life Science and Biotechnology
Mol-3	Basic and applied research for drug profiling and lead optimization	Life Science and Biotechnology
Bio-1	R&D-based Biological process	Life Science and Biotechnology
MIJ-7	Research and development of matrix type reference materials contributing to environmental and food safety	Metrology and Measurement Science

4. Medical Science

Mol-1	Development of fundamental technologies for drug discovery and medical treatment through the analyses of biological macromolecules and mechanisms	Life Science and Biotechnology
Mol-2	Research and development in measurement, analysis, and regulation of biological molecules	Life Science and Biotechnology
Mol-3	Basic and applied research for drug profiling and lead optimization	Life Science and Biotechnology
Hum-1	Research and development on the measurement and analysis of human and/or biological factors, and their applications	Life Science and Biotechnology
Hum-2	Research and development in human, health/welfare and medical engineering for the promotion of healthy and active lives	Life Science and Biotechnology

5. Human Medical Engineering

riss-1	R&D of comprehensive environmental impact assessment	Environment and Energy
Mol-2	Research and development in measurement, analysis, and regulation of biological molecules	Life Science and Biotechnology
Hum-1	Research and development on the measurement and analysis of human and/or biological factors, and their applications	Life Science and Biotechnology
Hum-2	Research and development in human, health/welfare and medical engineering for the promotion of healthy and active lives	Life Science and Biotechnology
SECIT-1	Information Technology for higher security, higher availability and higher dependability	Information Technology and Electronics
SECIT-2	Research on building cloud-based Big Data platform	Information Technology and Electronics
SECIT-3	Secure and Smart Sensing of Personal Data	Information Technology and Electronics
ITSVC-1	Multi-range sensing platform of geospatial information	Information Technology and Electronics
ITSVC-3	Research and Development of IT fusion services	Information Technology and Electronics
ITSVC-4	Research and Development of Interaction Technology for Social Content	Information Technology and Electronics
ITSVC-5	Motion generation and evaluation application of human figure	Information Technology and Electronics

6. Electrical Engineering and Electronics

energy device -1	R&D of energy devices and their management technologies	Environment and Energy
etri-1	R&D of Thermoelectric materials and devices for waste heat recovery.	Environment and Energy
green-1	R&D of evaluation / management technology for environment and energy	Environment and Energy
renewable-1	R&D of renewable energies	Environment and Energy
amri-3	Energy-saving technology by smart tribology	Nanotechnology, Materials and Manufacturing
ntrc-1	Development of nano-carbon materials	Nanotechnology, Materials and Manufacturing
ume-1	Ubiquitous micro-electro-mechanical systems for green innovation	Nanotechnology, Materials and Manufacturing
RIIF-2	Development of ultrafast laser spectroscopy	Metrology and Measurement Science
MSRC-2	Development of measurement technology for automating visual inspection system	Metrology and Measurement Science
MSRC3	Anomaly detection technology research and development for production and process equipments	Metrology and Measurement Science
MIJ-1	Research on the development of optical lattice clocks	Metrology and Measurement Science
MIJ-2	R&D towards the establishment of measurement standards for three-dimensional geometrical form and/or size both outside and inside a workpiece	Metrology and Measurement Science
MIJ-5	Electricity Standards Section 2, Electricity and Magnetism Division, MIJ	Metrology and Measurement Science
MIJ-6	Research and Development of measurement standards for horn antenna properties	Metrology and Measurement Science
MIJ-12	Research and development on accurate flow measurement technique for electric power plants	Metrology and Measurement Science
SECIT-1	Information Technology for higher security, higher availability and higher dependability	Information Technology and Electronics
SECIT-2	Research on building cloud-based Big Data platform	Information Technology and Electronics
SECIT-3	Secure and Smart Sensing of Personal Data	Information Technology and Electronics
ITSVC-2	Innovative Manifacturing System by integrating IT, Robotics, and Big Data	Information Technology and Electronics
GRNIT-1	Research and development of current- and voltage-driven spintronics devices	Information Technology and Electronics
GRNIT-2	Theoretical study of new spintronics devices	Information Technology and Electronics
GRNIT-3	Research and development of optical signal processing devices and optical node technologies for next generation networks	Information Technology and Electronics
GRNIT-4	Research and development of integrated optical devices for optical communication systems	Information Technology and Electronics
GRNIT-5	Research and Development of Flexible & Printed Electronics.	Information Technology and Electronics
GRNIT-6	Next Generation Optical Interconnection	Information Technology and Electronics
ADDEV-1	Research and development of electronic/photonic materials and devices (Two Researchers)	Information Technology and Electronics
ADDEV-2	Research and development of a new phase-transition functional device	Information Technology and Electronics
ADDEV-3	TCAD advancement for future devices, with new physical model and high performance computing.	Information Technology and Electronics

7. Information

green-1	R&D of evaluation / management technology for environment and energy	Environment and Energy
amri-4	Next generation manufacturing systems and/or design technologies	Nanotechnology, Materials and Manufacturing
ume-1	Ubiquitous micro-electro-mechanical systems for green innovation	Nanotechnology, Materials and Manufacturing
Mol-3	Basic and applied research for drug profiling and lead optimization	Life Science and Biotechnology
Hum-2	Research and development in human, health/welfare and medical engineering for the promotion of healthy and active lives	Life Science and Biotechnology
Georesource-5	Research of Geophysical Exploration Technology for Geo-resources and Environment	Geological Survey and Applied Geoscience
igg-1	Geological survey and mapping of basement rock area	Geological Survey and Applied Geoscience
MSRC-2	Development of measurement technology for automating visual inspection system	Metrology and Measurement Science
MSRC-3	Anomaly detection technology research and development for production and process equipments	Metrology and Measurement Science
MIJ-6	Research and Development of measurement standards for horn antenna properties	Metrology and Measurement Science
SECIT-1	Information Technology for higher security, higher availability and higher dependability	Information Technology and Electronics
SECIT-2	Research on building cloud-based Big Data platform	Information Technology and Electronics
SECIT-3	Secure and Smart Sensing of Personal Data	Information Technology and Electronics
ITSVC-1	Multi-range sensing platform of geospatial information	Information Technology and Electronics
ITSVC-2	Innovative Manifacturing System by integrating IT, Robotics, and Big Data	Information Technology and Electronics
ITSVC-3	Research and Development of IT fusion services	Information Technology and Electronics
ITSVC-4	Research and Development of Interaction Technology for Social Content	Information Technology and Electronics
ITSVC-5	Motion generation and evaluation application of human figure	Information Technology and Electronics
GRNIT-4	Research and development of integrated optical devices for optical communication systems	Information Technology and Electronics
ADDEV-3	TCAD advancement for future devices, with new physical model and high performance computing.	Information Technology and Electronics

8. Mathematics

MIJ-6	Research and Development of measurement standards for horn antenna properties	Metrology and Measurement Science
SECIT-1	Information Technology for higher security, higher availability and higher dependability	Information Technology and Electronics
SECIT-2	Research on building cloud-based Big Data platform	Information Technology and Electronics
SECIT-3	Secure and Smart Sensing of Personal Data	Information Technology and Electronics
ITSVC-1	Multi-range sensing platform of geospatial information	Information Technology and Electronics
ITSVC-2	Innovative Manifacturing System by integrating IT, Robotics, and Big Data	Information Technology and Electronics
ITSVC-3	Research and Development of IT fusion services	Information Technology and Electronics
ITSVC-4	Research and Development of Interaction Technology for Social Content	Information Technology and Electronics
ITSVC-5	Motion generation and evaluation application of human figure	Information Technology and Electronics
GRNIT-3	Research and development of optical signal processing devices and optical node technologies for next generation networks	Information Technology and Electronics
ADDEV-3	TCAD advancement for future devices, with new physical model and high performance computing.	Information Technology and Electronics

9. Social Science

riss-1	R&D of comprehensive environmental impact assessment	Environment and Energy
green-1	R&D of evaluation / management technology for environment and energy	Environment and Energy
ume-1	Ubiquitous micro-electro-mechanical systems for green innovation	Nanotechnology, Materials and Manufacturing
Hum-1	Research and development on the measurement and analysis of human and/or biological factors, and their applications	Life Science and Biotechnology
ITSVC-1	Multi-range sensing platform of geospatial information	Information Technology and Electronics
ITSVC-3	Research and Development of IT fusion services	Information Technology and Electronics
ITSVC-4	Research and Development of Interaction Technology for Social Content	Information Technology and Electronics

10. Mechanical Engineering

energy device -1	R&D of energy devices and their management technologies	Environment and Energy
etri-1	R&D of Thermoelectric materials and devices for waste heat recovery.	Environment and Energy
riss-1	R&D of comprehensive environmental impact assessment	Environment and Energy
riss-2	R&D of physical risk assessments for industrial safety	Environment and Energy
renewable-1	R&D of renewable energies	Environment and Energy
mhrc-1	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
mhrc-2	Analyses of methane hydrate production behavior on a large scale laboratory apparatus for exploitation of methane hydrate resources	Environment and Energy
mhrc-5	R&D on the analysis of gas/liquid/solid fluid mechanism in a methane gas production well from methane hydrate resources	Environment and Energy
nri-4	Development of system nanotechnologｙ	Nanotechnology, Materials and Manufacturing
amri-1	Development of ceramic-based thermal storage and insulation technologies	Nanotechnology, Materials and Manufacturing
amri-3	Energy-saving technology by smart tribology	Nanotechnology, Materials and Manufacturing
amri-4	Next generation manufacturing systems and/or design technologies	Nanotechnology, Materials and Manufacturing
sus-1	Research and development of powder consolidation and sintering techniques for advanced magnetic materials	Nanotechnology, Materials and Manufacturing
sus-2	Research and development on saving and alternative technology for rare metals	Nanotechnology, Materials and Manufacturing
ume-1	Ubiquitous micro-electro-mechanical systems for green innovation	Nanotechnology, Materials and Manufacturing
Georesource-2	Research of Ground Thermal Resources Evaluation and Ground Thermal Utilization	Geological Survey and Applied Geoscience
Georesource-6	Research of Geothermal Resource Evaluation and Engineered Development	Geological Survey and Applied Geoscience
RIIF-1	Development of physical property evaluation methods for carbon materials	Metrology and Measurement Science
MSRC-2	Development of measurement technology for automating visual inspection system	Metrology and Measurement Science
MSRC-3	Anomaly detection technology research and development for production and process equipments	Metrology and Measurement Science
MIJ-1	Research on the development of optical lattice clocks	Metrology and Measurement Science
MIJ-2	R&D towards the establishment of measurement standards for three-dimensional geometrical form and/or size both outside and inside a workpiece	Metrology and Measurement Science
MIJ-3	Research and development of vacuum and low-pressure standards and their dynamic measurements	Metrology and Measurement Science
MIJ-4	Development of high humidity/temperature generator	Metrology and Measurement Science
MIJ-11	Reaserch and development in nanoparticle metrology	Metrology and Measurement Science
MIJ-12	Research and development on accurate flow measurement technique for electric power plants	Metrology and Measurement Science
ITSVC-1	Multi-range sensing platform of geospatial information	Information Technology and Electronics
ITSVC-2	Innovative Manifacturing System by integrating IT, Robotics, and Big Data	Information Technology and Electronics
ITSVC-5	Motion generation and evaluation application of human figure	Information Technology and Electronics

11. Materials Science

ued-1	R&D of next generation rechargeable battery (sodium ion battery)	Environment and Energy
ued-2	R&D of next generation rechargeable battery (organic battery)	Environment and Energy
energy device -1	R&D of energy devices and their management technologies	Environment and Energy
etri-1	R&D of Thermoelectric materials and devices for waste heat recovery.	Environment and Energy
eda-1	R&D of smart energy use technology	Environment and Energy
isc-1	R&D of laser technologies of enviroment-friendly surface chemical processing	Environment and Energy
gmp-1	R&D of low environmental burden technologies of chemical process	Environment and Energy
riss-2	R&D of physical risk assessments for industrial safety	Environment and Energy
emt-1	R&D of resources recycling technologies	Environment and Energy
renewable-1	R&D of renewable energies	Environment and Energy
mhrc-6	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
nri-1	Development of thermal management materials including thermoelectric materials and thermal insulating materials	Nanotechnology, Materials and Manufacturing
nri-2	Nanosystem for adsorption/uptake of valuable resources	Nanotechnology, Materials and Manufacturing
nri-4	Development of system nanotechnologｙ	Nanotechnology, Materials and Manufacturing
amri-1	Development of ceramic-based thermal storage and insulation technologies	Nanotechnology, Materials and Manufacturing
amri-2	Innovative materials for energy creation and saving technology	Nanotechnology, Materials and Manufacturing
amri-3	Energy-saving technology by smart tribology	Nanotechnology, Materials and Manufacturing
amri-4	Next generation manufacturing systems and/or design technologies	Nanotechnology, Materials and Manufacturing
sus-1	Research and development of powder consolidation and sintering techniques for advanced magnetic materials	Nanotechnology, Materials and Manufacturing
sus-2	Research and development on saving and alternative technology for rare metals	Nanotechnology, Materials and Manufacturing
ntrc-1	Development of nano-carbon materials	Nanotechnology, Materials and Manufacturing
Mol-1	Development of fundamental technologies for drug discovery and medical treatment through the analyses of biological macromolecules and mechanisms	Life Science and Biotechnology
Hum-1	Research and development on the measurement and analysis of human and/or biological factors, and their applications	Life Science and Biotechnology
Georesource-4	Research of Advanced Materials and Mineral Resources Evaluation	Geological Survey and Applied Geoscience

12. Process Engineering

ued-1	R&D of next generation rechargeable battery (sodium ion battery)	Environment and Energy
ued-2	R&D of next generation rechargeable battery (organic battery)	Environment and Energy
eda-1	R&D of smart energy use technology	Environment and Energy
isc-1	R&D of laser technologies of enviroment-friendly surface chemical processing	Environment and Energy
gmp-1	R&D of low environmental burden technologies of chemical process	Environment and Energy
riss-1	R&D of comprehensive environmental impact assessment	Environment and Energy
emt-1	R&D of resources recycling technologies	Environment and Energy
green-1	R&D of evaluation / management technology for environment and energy	Environment and Energy
renewable-1	R&D of renewable energies	Environment and Energy
mhrc-3	R&D on a formation of the reservoir model of methane hydrate resources	Environment and Energy
mhrc-5	R&D on the analysis of gas/liquid/solid fluid mechanism in a methane gas production well from methane hydrate resources	Environment and Energy
mhrc-6	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
mhrc-7	Analyses of production behaviors on exploitation of methane hydrate resources	Environment and Energy
nri-2	Nanosystem for adsorption/uptake of valuable resources	Nanotechnology, Materials and Manufacturing
nri-3	Development of uptake system for useful or harmful substances	Nanotechnology, Materials and Manufacturing
amri-1	Development of ceramic-based thermal storage and insulation technologies	Nanotechnology, Materials and Manufacturing
amri-2	Innovative materials for energy creation and saving technology	Nanotechnology, Materials and Manufacturing
amri-4	Next generation manufacturing systems and/or design technologies	Nanotechnology, Materials and Manufacturing
sus-1	Research and development of powder consolidation and sintering techniques for advanced magnetic materials	Nanotechnology, Materials and Manufacturing
sus-2	Research and development on saving and alternative technology for rare metals	Nanotechnology, Materials and Manufacturing
MSRC-3	Anomaly detection technology research and development for production and process equipments	Metrology and Measurement Science
MIJ-3	Research and development of vacuum and low-pressure standards and their dynamic measurements	Metrology and Measurement Science
MIJ-11	Reaserch and development in nanoparticle metrology	Metrology and Measurement Science
MIJ-12	Research and development on accurate flow measurement technique for electric power plants	Metrology and Measurement Science
GRNIT-1	Research and development of current- and voltage-driven spintronics devices	Information Technology and Electronics
GRNIT-5	Research and Development of Flexible & Printed Electronics.	Information Technology and Electronics
GRNIT-6	Next Generation Optical Interconnection	Information Technology and Electronics
ADDEV-2	Research and development of a new phase-transition functional device	Information Technology and Electronics

13. Marine Engineering and Aerospace Engineering

There is no research theme for this area.

14. Earth and Planetary Science

mhrc-2	Analyses of methane hydrate production behavior on a large scale laboratory apparatus for exploitation of methane hydrate resources	Environment and Energy
mhrc-3	R&D on a formation of the reservoir model of methane hydrate resources	Environment and Energy
igg-1	Geological survey and mapping of basement rock area	Geological Survey and Applied Geoscience
igg-2	Geological survey and mapping of Cenozoic sedimentary sequences	Geological Survey and Applied Geoscience
igg-3	Geological investigation and compiling subsurface geological data on urban and coastal areas	Geological Survey and Applied Geoscience
igg-4	Marine geological survey and compilation of geological information around the Japanese islands	Geological Survey and Applied Geoscience
igg-5	Evaluation of isolation potential of natural barrier system in geological disposal of radioactive wastes	Geological Survey and Applied Geoscience
Georesource-1	Research of Geothermal Resources Evaluation and Geothermal Development	Geological Survey and Applied Geoscience
Georesource-2	Research of Ground Thermal Resources Evaluation and Ground Thermal Utilization	Geological Survey and Applied Geoscience
Georesource-3	Research of Fuel Resources Potential Evaluation	Geological Survey and Applied Geoscience
Georesource-4	Research of Advanced Materials and Mineral Resources Evaluation	Geological Survey and Applied Geoscience
Georesource-5	Research of Geophysical Exploration Technology for Geo-resources and Environment	Geological Survey and Applied Geoscience
Georesource-6	Research of Geothermal Resource Evaluation and Engineered Development	Geological Survey and Applied Geoscience
AFERC-1	Improvement of active fault evaluation	Geological Survey and Applied Geoscience
AFERC-2	Analysis of fault geometry and deep underground structures for seismic hazard assessment	Geological Survey and Applied Geoscience
GC-1	High Resolution Quarternary Volcanism Database	Geological Survey and Applied Geoscience

15. Civil, Architectural and Resource Engineering

eda-1	R&D of smart energy use technology	Environment and Energy
riss-1	R&D of comprehensive environmental impact assessment	Environment and Energy
mhrc-1	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
mhrc-2	Analyses of methane hydrate production behavior on a large scale laboratory apparatus for exploitation of methane hydrate resources	Environment and Energy
mhrc-3	R&D on a formation of the reservoir model of methane hydrate resources	Environment and Energy
mhrc-4	Estimation of the well integrity on methane hydrate sediment	Environment and Energy
mhrc-7	Analyses of production behaviors on exploitation of methane hydrate resources	Environment and Energy
nri-2	Nanosystem for adsorption/uptake of valuable resources	Nanotechnology, Materials and Manufacturing
nri-3	Development of uptake system for useful or harmful substances	Nanotechnology, Materials and Manufacturing
igg-3	Geological investigation and compiling subsurface geological data on urban and coastal areas	Geological Survey and Applied Geoscience
igg-5	Evaluation of isolation potential of natural barrier system in geological disposal of radioactive wastes	Geological Survey and Applied Geoscience
Georesource-1	Research of Geothermal Resources Evaluation and Geothermal Development	Geological Survey and Applied Geoscience
Georesource-2	Research of Ground Thermal Resources Evaluation and Ground Thermal Utilization	Geological Survey and Applied Geoscience
Georesource-3	Research of Fuel Resources Potential Evaluation	Geological Survey and Applied Geoscience
Georesource-5	Research of Geophysical Exploration Technology for Geo-resources and Environment	Geological Survey and Applied Geoscience
Georesource-6	Research of Geothermal Resource Evaluation and Engineered Development	Geological Survey and Applied Geoscience

16. Physics

ued-1	R&D of next generation rechargeable battery (sodium ion battery)	Environment and Energy
ued-2	R&D of next generation rechargeable battery (organic battery)	Environment and Energy
riss-2	R&D of physical risk assessments for industrial safety	Environment and Energy
emt-1	R&D of resources recycling technologies	Environment and Energy
mhrc-1	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
mhrc-4	Estimation of the well integrity on methane hydrate sediment	Environment and Energy
mhrc-5	R&D on the analysis of gas/liquid/solid fluid mechanism in a methane gas production well from methane hydrate resources	Environment and Energy
nri-1	Development of thermal management materials including thermoelectric materials and thermal insulating materials	Nanotechnology, Materials and Manufacturing
nri-3	Development of uptake system for useful or harmful substances	Nanotechnology, Materials and Manufacturing
ntrc-1	Development of nano-carbon materials	Nanotechnology, Materials and Manufacturing
RIIF-1	Development of physical property evaluation methods for carbon materials	Metrology and Measurement Science
RIIF-2	Development of ultrafast laser spectroscopy	Metrology and Measurement Science
MSRC-2	Development of measurement technology for automating visual inspection system	Metrology and Measurement Science
MIJ-1	Research on the development of optical lattice clocks	Metrology and Measurement Science
MIJ-2	R&D towards the establishment of measurement standards for three-dimensional geometrical form and/or size both outside and inside a workpiece	Metrology and Measurement Science
MIJ-3	Research and development of vacuum and low-pressure standards and their dynamic measurements	Metrology and Measurement Science
MIJ-4	Development of high humidity/temperature generator	Metrology and Measurement Science
MIJ-5	Electricity Standards Section 2, Electricity and Magnetism Division, MIJ	Metrology and Measurement Science
MIJ-6	Research and Development of measurement standards for horn antenna properties	Metrology and Measurement Science
GRNIT-2	Theoretical study of new spintronics devices	Information Technology and Electronics
ADDEV-1	Research and development of electronic/photonic materials and devices (Two Researchers)	Information Technology and Electronics

17. Applied Physics and Engineering Sciences

energy device -1	R&D of energy devices and their management technologies	Environment and Energy
etri-1	R&D of Thermoelectric materials and devices for waste heat recovery.	Environment and Energy
eda-1	R&D of smart energy use technology	Environment and Energy
isc-1	R&D of laser technologies of enviroment-friendly surface chemical processing	Environment and Energy
gmp-1	R&D of low environmental burden technologies of chemical process	Environment and Energy
riss-2	R&D of physical risk assessments for industrial safety	Environment and Energy
emt-1	R&D of resources recycling technologies	Environment and Energy
mhrc-1	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
mhrc-2	Analyses of methane hydrate production behavior on a large scale laboratory apparatus for exploitation of methane hydrate resources	Environment and Energy
mhrc-3	R&D on a formation of the reservoir model of methane hydrate resources	Environment and Energy
mhrc-4	Estimation of the well integrity on methane hydrate sediment	Environment and Energy
mhrc-5	R&D on the analysis of gas/liquid/solid fluid mechanism in a methane gas production well from methane hydrate resources	Environment and Energy
mhrc-6	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
mhrc-7	Analyses of production behaviors on exploitation of methane hydrate resources	Environment and Energy
nri-1	Development of thermal management materials including thermoelectric materials and thermal insulating materials	Nanotechnology, Materials and Manufacturing
nri-2	Nanosystem for adsorption/uptake of valuable resources	Nanotechnology, Materials and Manufacturing
nri-3	Development of uptake system for useful or harmful substances	Nanotechnology, Materials and Manufacturing
nri-4	Development of system nanotechnologｙ	Nanotechnology, Materials and Manufacturing
amri-1	Development of ceramic-based thermal storage and insulation technologies	Nanotechnology, Materials and Manufacturing
amri-2	Innovative materials for energy creation and saving technology	Nanotechnology, Materials and Manufacturing
amri-3	Energy-saving technology by smart tribology	Nanotechnology, Materials and Manufacturing
amri-4	Next generation manufacturing systems and/or design technologies	Nanotechnology, Materials and Manufacturing
sus-1	Research and development of powder consolidation and sintering techniques for advanced magnetic materials	Nanotechnology, Materials and Manufacturing
sus-2	Research and development on saving and alternative technology for rare metals	Nanotechnology, Materials and Manufacturing
ntrc-1	Development of nano-carbon materials	Nanotechnology, Materials and Manufacturing
ume-1	Ubiquitous micro-electro-mechanical systems for green innovation	Nanotechnology, Materials and Manufacturing
Hum-1	Research and development on the measurement and analysis of human and/or biological factors, and their applications	Life Science and Biotechnology
Georesource-1	Research of Geothermal Resources Evaluation and Geothermal Development	Geological Survey and Applied Geoscience
Georesource-2	Research of Ground Thermal Resources Evaluation and Ground Thermal Utilization	Geological Survey and Applied Geoscience
Georesource-4	Research of Advanced Materials and Mineral Resources Evaluation	Geological Survey and Applied Geoscience
Georesource-5	Research of Geophysical Exploration Technology for Geo-resources and Environment	Geological Survey and Applied Geoscience
Georesource-6	Research of Geothermal Resource Evaluation and Engineered Development	Geological Survey and Applied Geoscience
RIIF-1	Development of physical property evaluation methods for carbon materials	Metrology and Measurement Science
RIIF-2	Development of ultrafast laser spectroscopy	Metrology and Measurement Science
MSRC-1	Development of measurement technology for on-site sensing for agricultural production	Metrology and Measurement Science
MSRC-2	Development of measurement technology for automating visual inspection system	Metrology and Measurement Science
MSRC-3	Anomaly detection technology research and development for production and process equipments	Metrology and Measurement Science
MIJ-1	Research on the development of optical lattice clocks	Metrology and Measurement Science
MIJ-2	R&D towards the establishment of measurement standards for three-dimensional geometrical form and/or size both outside and inside a workpiece	Metrology and Measurement Science
MIJ-3	Research and development of vacuum and low-pressure standards and their dynamic measurements	Metrology and Measurement Science
MIJ-4	Development of high humidity/temperature generator	Metrology and Measurement Science
MIJ-5	Electricity Standards Section 2, Electricity and Magnetism Division, MIJ	Metrology and Measurement Science
MIJ-6	Research and Development of measurement standards for horn antenna properties	Metrology and Measurement Science
MIJ-10	Characterization and measurement techniques for functional nanostructured materials (nanoporous films and membranes)	Metrology and Measurement Science
MIJ-11	Reaserch and development in nanoparticle metrology	Metrology and Measurement Science
MIJ-12	Research and development on accurate flow measurement technique for electric power plants	Metrology and Measurement Science
SECIT-1	Information Technology for higher security, higher availability and higher dependability	Information Technology and Electronics
SECIT-2	Research on building cloud-based Big Data platform	Information Technology and Electronics
SECIT-3	Secure and Smart Sensing of Personal Data	Information Technology and Electronics
ITSVC-2	Innovative Manifacturing System by integrating IT, Robotics, and Big Data	Information Technology and Electronics
ITSVC-3	Research and Development of IT fusion services	Information Technology and Electronics
ITSVC-4	Research and Development of Interaction Technology for Social Content	Information Technology and Electronics
ITSVC-5	Motion generation and evaluation application of human figure	Information Technology and Electronics
GRNIT-1	Research and development of current- and voltage-driven spintronics devices	Information Technology and Electronics
GRNIT-2	Theoretical study of new spintronics devices	Information Technology and Electronics
GRNIT-3	Research and development of optical signal processing devices and optical node technologies for next generation networks	Information Technology and Electronics
GRNIT-4	Research and development of integrated optical devices for optical communication systems	Information Technology and Electronics
GRNIT-5	Research and Development of Flexible & Printed Electronics.	Information Technology and Electronics
GRNIT-6	Next Generation Optical Interconnection	Information Technology and Electronics
ADDEV-1	Research and development of electronic/photonic materials and devices (Two Researchers)	Information Technology and Electronics
ADDEV-2	Research and development of a new phase-transition functional device	Information Technology and Electronics
ADDEV-3	TCAD advancement for future devices, with new physical model and high performance computing.	Information Technology and Electronics

18. Chemistry

ued-1	R&D of next generation rechargeable battery (sodium ion battery)	Environment and Energy
ued-2	R&D of next generation rechargeable battery (organic battery)	Environment and Energy
energy device -1	R&D of energy devices and their management technologies	Environment and Energy
etri-1	R&D of Thermoelectric materials and devices for waste heat recovery.	Environment and Energy
eda-1	R&D of smart energy use technology	Environment and Energy
isc-1	R&D of laser technologies of enviroment-friendly surface chemical processing	Environment and Energy
gmp-1	R&D of low environmental burden technologies of chemical process	Environment and Energy
riss-2	R&D of physical risk assessments for industrial safety	Environment and Energy
emt-1	R&D of resources recycling technologies	Environment and Energy
green-1	R&D of evaluation / management technology for environment and energy	Environment and Energy
renewable-1	R&D of renewable energies	Environment and Energy
mhrc-1	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
mhrc-2	Analyses of methane hydrate production behavior on a large scale laboratory apparatus for exploitation of methane hydrate resources	Environment and Energy
mhrc-5	R&D on the analysis of gas/liquid/solid fluid mechanism in a methane gas production well from methane hydrate resources	Environment and Energy
mhrc-6	Analyses of flow assurance mechanism on exploitation of methane hydrate resources	Environment and Energy
nri-1	Development of thermal management materials including thermoelectric materials and thermal insulating materials	Nanotechnology, Materials and Manufacturing
nri-2	Nanosystem for adsorption/uptake of valuable resources	Nanotechnology, Materials and Manufacturing
nri-3	Development of uptake system for useful or harmful substances	Nanotechnology, Materials and Manufacturing
nri-4	Development of system nanotechnologｙ	Nanotechnology, Materials and Manufacturing
amri-2	Innovative materials for energy creation and saving technology	Nanotechnology, Materials and Manufacturing
amri-3	Energy-saving technology by smart tribology	Nanotechnology, Materials and Manufacturing
sus-2	Research and development on saving and alternative technology for rare metals	Nanotechnology, Materials and Manufacturing
ntrc-1	Development of nano-carbon materials	Nanotechnology, Materials and Manufacturing
Mol-1	Development of fundamental technologies for drug discovery and medical treatment through the analyses of biological macromolecules and mechanisms	Life Science and Biotechnology
Mol-2	Research and development in measurement, analysis, and regulation of biological molecules	Life Science and Biotechnology
Mol-3	Basic and applied research for drug profiling and lead optimization	Life Science and Biotechnology
Hum-2	Research and development in human, health/welfare and medical engineering for the promotion of healthy and active lives	Life Science and Biotechnology
Georesource-4	Research of Advanced Materials and Mineral Resources Evaluation	Geological Survey and Applied Geoscience
GC-1	High Resolution Quarternary Volcanism Database	Geological Survey and Applied Geoscience
RIIF-2	Development of ultrafast laser spectroscopy	Metrology and Measurement Science
MSRC-1	Development of measurement technology for on-site sensing for agricultural production	Metrology and Measurement Science
MIJ-4	Development of high humidity/temperature generator	Metrology and Measurement Science
MIJ-7	Research and development of matrix type reference materials contributing to environmental and food safety	Metrology and Measurement Science
MIJ-8	Development of high perfomance gas standards	Metrology and Measurement Science
MIJ-9	Study for development of organic reference materials	Metrology and Measurement Science
MIJ-10	Characterization and measurement techniques for functional nanostructured materials (nanoporous films and membranes)	Metrology and Measurement Science
MIJ-11	Reaserch and development in nanoparticle metrology	Metrology and Measurement Science
GRNIT-5	Research and Development of Flexible & Printed Electronics.	Information Technology and Electronics
GRNIT-6	Next Generation Optical Interconnection	Information Technology and Electronics
ADDEV-1	Research and development of electronic/photonic materials and devices (Two Researchers)	Information Technology and Electronics

19. Astronomy

There is no research theme for this area.

20. Etc.

gmp-1

R&D of low environmental burden technologies of chemical process

Environment and Energy