1.DESIGNATED RESEARCHESReturn ［2.SPECIAL RESEARCHES］ Industrial Science and Technology Frontier Program
Super metal
Research and Development of Nanostructured Material
Micromachine Technology
Evaluation of Micro Motion Mechanisms
Development and Evaluation of Downsizing Technology of Manufacturing Machine
Advanced Photon Processing and Measurement Technologies
Development and Evaluation of Laser Measurement and Processing Technologies
Development and Evaluation of High-efficiency Manufacturing Process Technology
Microscopic processing Technology
Humanoid Robotics
Standing Motions Requiring Dynamic Compensation in Basic Motion Library
Evaluation on Remote Maneaubability of Robot Platform
The evaluation of the basic motion library
Smart Materials and Structures
Active Vibration Control of Smart Structures
Frontier Carbon Technology
Tribology of Advanced Carbon Materials
Medical a Welfare Apparatus
Artificial Organs Project
Totally Implantable Artificial Heart System
Study on Evaluation of Life Support System Used at Home
Study on Evaluation of Life Support Apparatus Used at Home
Less-Invasive Surgery Support System Project
Research on Intra-operative Generation/Updation of Control Information of Surgical Manipulator
High-speed and 3 Dimensional CT using Cone Beam Xray
Novel Image Reconstruction and Information Processing for 4 Dimensional Medical Images
Cooperative Research between Medical Science and Engineering
Integrated Diagnosis & Treatment Assist System for Cardiovascular Surgery
Assistive System for Physical Therapy
R&D Program on Energy and Environmental Technologies
Wind Energy Technology
Wind Energy Conversion System
Analysis and Evaluation of Wind Turbine Generators Systems for Remote Islands
Solar Energy Technology
Analysis of Silicon Single Crystal Growth Process for Photovoltaic Substrate
Analysis of Molecule Diffusion Phenomena
Broad Area Energy Utilization Networks Systems
Advanced Heat Exchange and Heat Utilization
Analysis and Evaluation on Exhaust Heat Recovery System
Drag Reduction and Heat Transfer Enhancement by Microscale Concave-Convex Surface
Technologies Related to Global Environment
Feasibility Studies on MGC Materials for Advanced Turbine System
Hydrogen Energy Technology
Evaluation of High Efficiency Hydrogen-Oxygen Combustion Engine
Global Optimization of WE-NET Total System
Superconductivity Technology for Electric Power Apparatuses
Evaluation of Structural Integrity for Superconducting Generator
Evaluation of Vibration Characteristics of High-Speed Rotating Body
Advanced Carbon-dioxide Recovery System on the Closed Gas Turbine
External Cost of Energy Systems
Analysis and Evaluation of Closed Gas Turbine System with Steam Recirculation
Energy Utilization System Analysis and Evaluation
Specific Regional Technology Development System
Evaluation of Processing Technology for Eco-Tailored Tribomaterials
Pressing Technology for Advanced Tribomaterials
Laser Applied Advanced processing System
2.SPECIAL RESEARCHESReturn ［3.INTERNATIONAL JOINT RESEARCH GOVERNMENT-PRIVATE SECTOR ］
Technology for Measurement and Standardization
Optical Distance and Profile Measurements with Self-Calibrating Environmental Disturbances Using Non-Linear Optical Elements
Energy, Resources and Environment Technology
Advanced Heat Utilization Technology for Natural Heat Resources with a Short-Term Fluctuations in Temperature
Study of Advanced CO2 Release Reduction Technology
Bionics
Development of Hybrid Functionally Gradient Materials and Their Biological and Mechanical Compatibility
New Materials Technology
Fabrication Technology of Advanced Diamond Related Material
Application of System Engineering
Reactive Loco-Manipulation
ITS Technologies for Energy Savings
Autonomy with Dynamic Behavior for Mobile Robots
Integration of Locomotion and Manipulation
Basic Research on the Active Mechanical Engineering System for Mitigation of an Earthquake
A Self-Organizing Mechanical System
Industrial Foundation
Application of New Functional Materials to Machine Elements
High Speed Temperature Control by Microscale Thin-film Thermocouples Array
Advanced Artificial Lighting for Plant Production
Rapid-Production of Intelligent Micro Parts Made from Ultra Fine Particles
Machinery Based on Quantum Effects
Space-Time Adaptive Finite Element Methods for Fluid Dynamics
Interdisciplinary Research
Net-Shape Technique of Intermetallic Compound Using Supercritical Debonding Process
Fundamental Research on Standardization
Study on Evaluation Method for Biocompatibillity of Biomaterials
Evaluation Method of Blood Compatibility of Medical Materials
Specific International Joint Research Project
Development of Super-Materials in Application of Electromagnetism in Solid
Two Phase Fluid Behavior and its Application under Microgravity Conditions
Research on MR-compatible Active Holder for Surgical Assistance
Technology for Small and Medium-Sized Enterprises
Processing Technology for Higher Value Addition on Metal Surfaces
A Sharing Method of Engineering Data with Distinct Structure
Nuclear Engineering for Peaceful Use
Advances in Multi-dimensional Thermal Hydraulics Measurement Techniques Using a Fast X-ray CT Scanner
Pollution Protection Technology
Stratified Super Lean-Burn Engine with Alternative Fuel
Application of DeNOx Catalyst to Diesel Engine and Particulate Control Using Magnetic Field
Institute for Transfer of Industrial Technology
High Performance Metal Matrix Composites
Advanced Control of Machine Tool Systems
Precision Forging Technology to Manufacture Net-Shape Parts
3.INTERNATIONAL JOINT RESEARCH GOVERNMENT-PRIVATE SECTORReturn ［4.COMPETITIVE R&D ON DESIGNATED TECHNOLOGY］
Development of Functionally Gradient Materials
Development of High Performance Magnesium Alloys
Development of Ultra-solid Lubricant with Cluster Diamond
Combustion Technology for Fuel Diversity
4.COMPETITIVE R&D ON DESIGNATED TECHNOLOGYReturn ［5.ORDINARY RESEARCH］
Nano-measuring Techniques of Dynamic Surfaces
Study on Life Cycle Assessment
Advanced Chemo-mechanical Machining
Study of Open MRI-Guided Diagnosis/Treatment Concurrent System
5.ORDINARY RESEARCHReturn ［6.COORDINATION FUNDS FOR PROMOTING SCIENCE AND TECHNOLOGY］
Department of Material Science & Bioengineering
Application and Non-Destructive Inspection of Polymeric Materials
Analysis of Fracture Mechanism of Materials Based on Atomic/Molecular Modeling
Studies on Establishment of Techno-Infrastructure for Advanced Composite Materials
Superplastic-Forming of Austenitic Stainless Steel
Tribology of Inorganic Brittle Materials at Extreme Conditions
Mechanical Properties and Internal Structure of Biological Hard Tissues
New Methods for Neurotransmitter Analysis
Estimation of Biomaterials with Macrophage
Department of Applied Physics & Information Science
Control of Statistical Properties of Light and its Applications
Control Methods on Stratospheric Powered Balloons
Emergent Engineering
Driver-Vehicle Control System in ITS
Environment Conscious Design Support
Department of Advanced Machinery
Effect of the Surface Structure on the Mechanical Properties
Mechanism of fatigue of Steel Surface in Rolling Sliding Contact
Fundamental Research on Nonisotropic Nano-scale Phenomena
Intelligent Decentralized Control of a Flexible Distributed-Parameter Structure
Underground Sound and Vibration Measurement Techniques
Motion Control of Nonlinear System
Department of Energy Engineering
Potential Evaluation of Countermeasures Against Greenhouse Effect
The Study of Thermal Transport Mechanism in Supercritical Fluids
Surface Processing by Laser Guided Discharge
Numerical Analysis of Turbulent Flow and Experiment of Turbine Cascade
Zero-Emission Combustion Technology
Small Scale Energy System
Hydrogen-Lithium Thermally Regenerative Fuel Cell
Reducing Method of Tire/Road Noise
Effect of Roughness of Iced Road on Tire Characteristics
Evaluation and Control of Low Concentration Air Pollutants
Evaluation of Nano-particle Emission
Department of Manufacturing
Combined Machining Process Based on Electrochemical Dissolution
Low Emission Manufacturing
Development of Surface Structure Control Method
Deep Etching Technique with Neutral Solution
Making Overhanging Projections
Machining, Forming, and Welding of Magnesium Alloy
Study on Life-cycle Strategy for Machine Tools
Sensor and Actuator Integrated Structure
Department of Robotics
Basic Study on Robotic Skill
Study on Redundant Leg
Interface Technology for Human-robot Cooperation
Key Technologies for Robot in New Application Fields
Analytical and Learning Approaches to Dynamic Skills
Study on Human Interface Technology of Assisitive Devices
6.COORDINATION FUNDS FOR PROMOTING SCIENCE AND TECHNOLOGYReturn ［7.REGIONAL CONSORTIUM PROJECT］(Science and Technology Agency)
Encouragement of Basic Researches at National Research Institute
Advanced Assembling and Machining Technology
Sensing of Transitional Signals and Analysis of Responses to the Signals
Innovative Energy Conversion and Energy Transport Mechanism
Mechanism and Control of Casting Manipulator system
Acquisition and Realization of Human Skills for Machine Systems
The Size Effect on the Mechanical Properties of the Materials
Promotion System for Intellectual Infrastructure of R&D
Evaluation Method for Wear Characteristics of New Materials
Study of Evaluating Method for Interferometer Using a Variable Wavelength Laser
Study of Machining and Measurement for Micro Geometrical Surface
Encouragement of Limited-Term Contract System for Researchers
Development of a Micro-Pump with Vibrating Hairs
Autonomous Dynamic Control for Flexible Human-Machine Systems
Active Control of Turbulent Flow
Optical Manipulation Technique for Micro-objects
7.REGIONAL CONSORTIUM PROJECTReturn ［8.RESEARCH INFORMATION PROCESSING SYSTEM(RIPS)］
Development of Diagnosis System Using Acoustic Emission Method
Micro Resonant Device Actuated by Ferroelectric thin Films
High Precision and High Productivity Technology for Multi-axis Cutting with a Non-Rotational Tool
Fundamental Miniaturization Technology for Machine Tools
Development of a Reverse Engineering System for Local Industrial Arts
Thick Film Technology of Smart Materials for MEMS
Fundamental Technology for Advanced Mini-production System
Research on Localized Surface Modification and Welding of Magnesium Alloys
8.RESEARCH INFORMATION PROCESSING SYSTEM(RIPS)Return ［9.GLOBAL ENVIRONMENT RESEARCH PROGRAM］
Development of Manufacturing Technology Database
9.GLOBAL ENVIRONMENT RESEARCH PROGRAMReturn ［10.JOINT RESEARCH］
Estimation Of Environmental Load Generated by Urban Traffic
Improvement of Life Cycle Cost of EVs
10.JOINT RESEARCHReturn
Materials Technology for Micromachine
Design and Fabrication of Micromachines
Experimental Analysis of Heat Exchange Process with Chemical Reactions
Assembly of 3D Large-Volume Structure
Performance Measurement and Analysis of 500 kW-class Wind Turbine Generator System
Researches on Stratospheric Platform Technologies
Evaluation for Fatigue of Bearing Steel using Acoustic Emission Techniques
Application of a Magnetic Suspension Centrifugal Pump to a Blood Pump
Tele-operation for the Remote Robots over ISDN-network
Development of Functionally Gradient Materials
Study on Improvement of Heat Resistance and Wear Resistance of Functionally Gradient Materials
Research on Advanced Welding Database
Micro Force Feedback Control System for Micro Manipulation
Evaluation of Physical Properties of Thin Films
Sensing Systems for Automated Driving Systems
Three dimensional assembly of micro structural parts
Development of High Performance Magnesium Alloys
Research and Development of High Efficiency Liquid Phase Reactor
- Promotion of liquid phase reaction using micro bubble -
Advanced Ice Slurry Storage and Transportation Method for High Performance Cogeneration System
Development of Hydrogen-Combustion Diesel Engine Cogeneration System
Behavior of liquid CO2 released into the ocean
Production of Ultra-fine Particles by Laser
Study for a high speed, high precision spindle of a miniaturized lathe
Flow visualization and computational fluid dynamic analysis for blood turbo pumps
Improvement of the low-loading reciprocating frictional-tester and tribological evaluations
R & D on Stratospheric Airship Technology
Study of light propagation in human heads
Micro-rheological Research on Drag Reduction and Heat Transfer Enhancement effects of Surfactant Solutions
Study on rolling friction
Vehicle Control Systems
Investigation research on economical-efficiency of micro factories
A Study on Receding Horizon Control
Performance and Emission of LPG Diesel Engine using Cetane Number lmprovers
Studies on Automated Vehicle Driving Systems Taking Account of Ride Quality
A Study on application of Inverse Problem for Mechanical Control
Micro factories Technology
Research on Teetering Rotors for Wind Turbine of High Performance
Development of Ultra-Solid Lubricant with Cluster Diamond
Accuracy improvement of micro manipulation
Research & Development of Combustion Analysis Technology for High Efficiency & Low Emission Premixed Combustion Engines
Frontier Carbon Technology - Processing Technology of Carbon Materials with Highly Mechanical Function
Processing Technology of Tribomaterials for Auto-Mobile Parts
Investigation of Measurement Technique of Liquid under Micro-gravity Conditions by using Helmholtz resonator
lmplementation of tele-operation robots for collaboration tasks
Optimal form and behavior of living creatures
Development of autonomous behavior unit
Application of micromachining for realization of IC Probe Card
Construction of scanning force microscope combined with transmission electron microscope
